With winter in full swing in Washington, you rely on your furnace more than ever. It can be annoying to have furnace troubles in the middle of winter as the chilly winter weather settles in Washington. However, resolving the issue may be simpler than you think.
To avoid the problem, the best thing to do is to make a maintenance checklist for your heating system or a complete repair of your furnace. You must call a trained technician for furnace repair in Snohomish, WA.
It’s one thing to snuggle up under your blankets and enjoy the crisp air, but dealing with a broken heating system is quite another. If you’re not sure why your furnace won’t turn on, try troubleshooting how to fix your furnace yourself by following these steps:
Make Sure Your Thermostat is Turned On
Ensure the thermostat is set to “heat” and the temperature is set above the room temperature. Some thermostats are hardwired into the home’s electrical system, while some are powered by batteries. Check the thermostat’s battery and replace them if required.
Some devices will flash a low-battery indicator when a battery has to be replaced. Remove any dust or debris that has clogged the thermostat by opening it and gently blowing it out. Use a soft brush or a cloth to clean the thermostat. Check the circuit breaker. If the breaker is on, switch it off and check the furnace fuse.
Reset The Home Circuit Breaker
Find the circuit that controls the furnace in your home’s breaker panel. Check if it’s set to “off” or if it’s anywhere in the center. Test the breaker manually. It can be flipped back and forth. Ensure that it remains in the “on” position. The breaker will be reset as a result of this action.
If this doesn’t work, there can be a problem with the circuit’s wiring or the circuit breaker itself. In such a situation, you must call a professional for furnace repair in Lynnwood, WA. The technician will check the wiring properly and fix it accordingly.
Check Your Filter
This is a simple yet important part of furnace upkeep. A clogged filter is one of the most prevalent causes of furnace failure. It’s also the simplest task in terms of maintenance. Your air handler has to work harder to compensate for the blocked airflow when your air filter is clogged.
Another clue that your furnace filter needs to be changed is a dusty, unclean odor coming from the vents when the blower is turned on. If you notice any unpleasant smell from your furnace, immediately clean it or hire a professional to clean or replace the filter.
If the tips do not work for you in detecting or resolving problems, or if they are beyond your skill level, you may require the assistance of a furnace repair professional. It is important to keep your furnace system clean and tuned up regularly.